| Model | FW1018V1 | Viewing Angle | 85°/85°(L/R) 85°/85°(U/D) |
| Screen Size | 10.1″ IPS | Input Voltage | DC6～36V |
| Resolution | 1920×1200 pixels | Working Temperature | -20°C~55°C |
| Brightness | 320cd/m⊃2; | Storage Temperature | -30°C~65°C |
| Contrast Ratio | 800:1 | Install Way | 1/4″-20 Thread Socket (3 sides left&right&bottom) |
| Pixel Pitch | 0.113(H)×0.113 (W) mm) | Power Consumption | ≤12W |
| Input | HDMI,Y, Pb, Pr, Video, Audio(L/R), Tally | Unit Size | 258L×192H×39D mm ) |
| Output | HDMI,Y, Pb, Pr, Video, | Unit Weight | 810g |
| Power Connector | DC/ 4-pin XLR | Battery Plate | F970 (Standard); D28S, LP-E6, V-Mount, Anton Bauer (Optional) |
| SDI Support Format 480i/576i 720p(60/59.94/50/30/29/25/24/23.98) 1080i(60/59.94/50) 1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF) | |||
| HDMI Support Format 480i/576i/480p/576p 1080i (60/59.94/50) 720p (60/59.94/50/30/29/25/24/23.98) 1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF) 4K UHD 3840×2160p (30/29.97/25/24/23.98 Hz), 4096×2160p (24Hz) | |||
| Advanced Features * Peaking Focus Assist * Check Field (Red, Green, Blue, Mono) * Camera Mode * Anamorphic Mode (1.3x, 2.0x, 2.0x mag) * Image Flip (H, V, H/V) * Image Freeze * Center Marker * Screen Marker (80%,85%,90%,93%,96%, 2.35:1) * Ratio marker (4:3,13:9,14:9,15:9,16:9,1.85:1,2.35:1) * Color Temperature Adjustment * Nine Grid (Zoom one of the images to realize the full screen) (Nonsupport in 4K input) * Zoom (4X, 9X, 16X) (Nonsupport in 4K input) * Aspect Ratio (Nonsupport in 4K input) * Pixel to Pixel (Nonsupport in 4K input) * Zoom All (Nonsupport in 4K input) * U/D Zoom (Nonsupport in 4K input) * L/R Zoom (Nonsupport in 4K input) | |||
1920X1200 IPS FHD Panel
Enjoy Consistent Images from Any Perspective. FW1018V1 uses an IPS panel, which provides a wide 170°/170° viewing angle and brightness output, up to 320cd/m⊃2;. This means you’ll be able to see accurate, consistent and bright images from any viewing point.
Professional Peaking Focus Assist
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. It’s shows Red highlight over parts of the monochrome image in focus.
3-color Tally Light
DB-9 input signal
There is front TALLY lights with 3 colors display, and controlled via DB-9 ports on the rear panel.
Flexible Battery Systerm
The monitor is powered from 4-pin XLR connector, or 12V DC input with the included power adapter, and FW1018V1 has flexible battery systerm that supports F970, LP-E6, D28S, Anton, Sony V mount plates of your choice.
